Description Septone Rust Converter Rust Converter is a concentrated phosphoric acid base and is used as a pre-painting treatment for converting surface rust (iron oxide) into iron phosphate. This forms an ideal base for further protective coatings. RUST CONVERTER may be used on the following surfaces: Rusted galvanised roofs or surfaces Ornamental ironwork Fencing Structural steel Automotive panels Rusted nuts, bolts and hand tools FEATURES & BENEFITS – Suitable for use on variety of materials. – Phosphoric acid based. – Creates ideal base for protective coatings. APPLICATION Using a wire brush or coarse sand paper, remove all paint, flaking rust, loose scale & dirt. Apply Wax & Grease Remover to remove all grease, oil & bitumen etc. Apply Rust Converter undiluted by brush or spray. Allow 15-30 minutes to react. Once treated, wipe over surface with cloth dampened with water. Immediately wipe over with a second cloth dampened with methylated spirits. Wipe with a clean, dry cloth. PLEASE NOTE: This product is classed as ‘Dangerous Goods’ for transport purposes. Therefore is only available for click & collect or delivery to the local Cairns area.
